Service
Concrete Driveways in Smithfield, RI
A new concrete driveway in Smithfield starts around $9–$15 per square foot and, done right, means a 4-inch-minimum slab on a compacted stone base, a freeze-thaw-rated mix, and control joints saw-cut within a day of the pour. We handle tear-out through final joints.
Scope of work
What a driveway job includes
Whether you're replacing a cracked slab in Georgiaville or pouring a first concrete drive over an old gravel approach off Colwell Road, the sequence is the same — only the quantities change.
- Demolition & haul-off. Existing concrete or asphalt broken out and removed; gravel drives graded and prepped in place.
- Subgrade & base. Soil cut to grade, pitched a minimum of about 1% away from the house and garage, then a compacted processed-gravel base built to the depth the soil calls for.
- Forming. Forms set to line and elevation, with attention to how the apron meets the road and how water sheds at the garage slab.
- Reinforcement. Fiber-mesh in the mix or a steel mat on chairs, depending on span, expected loads, and soil.
- Placement & finish. 4,000 PSI air-entrained concrete placed, screeded, bull-floated, edged, and given a light broom finish for winter traction.
- Joints. Control joints saw-cut in a planned grid (roughly 10–12 ft on center) within 24 hours; isolation joints where the slab meets the garage, walk, or foundation.
- Cleanup & cure guidance. Site raked out and swept, with written instructions for the first month.
Free driveway quote
On-site measure in Smithfield, usually within a few days.
Details that matter here
Built for Smithfield winters
Thickness sized to use
4 inches is the residential standard. Where an RV, a landscape trailer, or an oil-delivery truck uses the drive, we thicken to 5–6 inches in those wheel paths rather than hoping.
Drainage before concrete
Standing water and freeze-thaw are what wreck slabs. We set pitch so runoff leaves the driveway and doesn't track toward the foundation or pool at the garage door.
A real joint plan
Joints are laid out before the pour, not guessed at afterward — square panels, cut deep enough and early enough to actually control where the slab relieves stress.
Salt-aware finishing
A light broom texture for grip, air entrainment for scaling resistance, and a first-winter reminder: skip the de-icing salt and use sand while the surface matures.
Timeline
How long it takes
A standard Smithfield driveway replacement is typically a two- to three-day job on site: demo and base prep on day one, forming and the pour on the next good-weather day, joints cut the following morning.
After the pour, keep everything off the slab for 24–48 hours, foot traffic only for about a week, and vehicles after 7–10 days. The concrete keeps gaining strength for roughly 28 days — that's when it's fully ready for heavy loads.
Good to know
Permits & the apron
Work within the public right-of-way — the apron where your driveway meets a Smithfield or state road — can require a permit or a driveway opening approval. If your project touches that zone, we'll flag it and walk you through the Town process before we start.
Inside your property line, most residential replacements don't need a permit, but we confirm case by case rather than assume.
Next step
Get your Smithfield driveway quoted
Free on-site measure, written scope, and a number you can hold us to.